Two Switches Perform Different Funtions

Download file in Fluid Sim 3.6 here:
Download File

Full Adder

Problem: Design a full adder in Fluid logic. Following is the truth table of full adder circuit.

Download file in Fluid Sim 3.6 here:

Download File

Half Adder

Problem: Design a Half Adder circuit in Fluid Logic.

Download file in Fluid Sim 3.6 here:
Download File

Design: Water tank empty in given time

Problem: Design a logic (electrical or pneumatic), when any number enter from 5 to 60 (minutes), the tank will empty in that time and the Flow Control Valve open accordingly to the number we enter in the keypad.

Design: Vehicle Parking Area Problem

Problem: Design a logic(electrical or pneumatic), when any Vehicle near the entrance area the door automatically open when Vehicle enter the parking area door closed, and similarly when any Vehicle near the exit area which is already parked, the door automatically open, when Vehicle exit the exit door closed. Only 4 Vehicle allow in the parking, if 5th Vehicle near the entrance and 4 already in the parking area, the entrance door must not be open.

Drilling

Problem: Design a logic that drilling a square box all corners. Cylinder A and B holding th box and cylinder C drill it.

Download file in Fluid Sim 3.6 here:
Download File

Filling Station using Level sensor

Problem: Design an electric circuit in which when Start button is pressed conveyer belt starts in which bottle is placed, these bottle pressed limit switch 1, after 3 sec, filling station start filling the bottle. A level sensor placed near the bottle, when bottle fill completely, level sensor sence it and filling station close and after 2 sec, conveyer belt start again for next bottle fill.

Download file in Fluid Sim 3.6 here:
Download File

Gets outputs in different interval when press button release

Problem: Design an electric circuit in which when Start button is pressed and released 3 output on each after 5 sec and then off each after 2 sec reversely.

Download file in Fluid Sim 3.6 here:
Download File

Single PRESS button perform many functions

Problem: Design an electric circuit in which when we press START button the filling station will OPEN for 2 sec, If we press again START button the filling station OPEN for 5 sec, If we press again START button the circuit will reset.

Download file in Fluid Sim 3.6 here:
Download File

Use of Solenoid Operated Valve

Problem: Design an electric circuit in which
SOV1 ON FOR 5 SEC THEN OFF
SOV2 ON FOR 5 SEC THEN OFF
MIXER ON FOR 5 SEC THEN OFF
SOV3 ON FOR 10 SEC THEN OFF

Download file in Fluid Sim 3.6 here:
Download File

Placement of items in different position

Problem: Design an electric circuit in which movable conveyer belt drop 5 box on position 1 and 10 box in position 2.

Download file in Fluid Sim 3.6 here:
Download File

Interlocking concept

Problem: Design an electric circuit in which when we press START button the Conveyer belt 1 (C.B.1) is ON and Proximity Sensor 1(P.S.1)  sence 5 small boxes. After 5 boxes drop on large box Conveyer belt 1 STOP and C.B.2 start. When large box under droping position of small box, C.B.2 STOP and C.B.1 START again.

Download file in Fluid Sim 3.6 here:
Download File

Gets output after releasing the button

Problem: Design an electric circuit in which is energized after release the button that 3 outputs ON with 0 sec delay and then go OFF each after 5sec.

Download file in Fluid Sim 3.6 here:
Download File

Delay between outputs

Problem: When a push button is presed an output 1 should be ON with 0 sec dealy and another output should be on with 5 sec delay. After energizing of both o/p, system should be reset after 5 sec.
Download file in Fluid Sim 3.6 here:
Download File